$219.00 $299.00
New! This wheel has a unique design with angled spokes that spread out from the center, then kink back toward the lip of the wheel. The 18x9.5 +38 fitment is big...
$229.00
Rota Titan features clean looks with thin, sharp spokes. The minimal design is easy to clean. Light, too, at just 16.9 pounds! +40 offset, 4x108 bolt pattern, 73mm hub bore....
$0.98
Route provides protection for shipments that are lost, broken, or stolen. Add Route to your cart at checkout to enable protection. Visit route.com to learn more.
$100.00
These replacement valves from SI Valves feature an undercut stem in the head area. In addition to reducing the valve weight (which provides benefits in opening rate and RPM limits)...
$27.00
Save time and money with these combination 90-degree elbow/reducers. Not to mention an elbow reducer can fit where a separate elbow and reducer might not. Royal blue in color.
$25.00
Available in blue, black, or red. Appearance may vary slightly; we keep stock from several different suppliers depending on availability.
$20.00
A hump hose has a bulge in it that is designed to allow the joint to flex. Extremely helpful for joints that tend to pull off!
$20.00
Reducer couplers range in length between 2.75" and 4.00". Available in blue, black, or red.
$9.00
Coupler length varies, but is usually between three and four inches. Just for reference, WRX and STI original equipment throttle bodies use a 2.75" coupler. Available in blue, black, or...
$35.00
Set of two posts with mounting hardware, scuff plates, and integrated (captive) locking pins. Now available in anodized red and blue pins and posts. Universal; fits most vehicles. Custom installation...
$39.00
Front camber adjustment for Lancer Evo 8 and 9. 14mm EZ CAM XR adjustment bolts offer max camber of +1.75 degrees. Set of two camber correction bolts. Fits all 2003-2007 Mitsubishi...
$49.00 $69.00
Good stuff, cheap! No returns on clearance items, though. Get them while they last! CNC-machined stamped stainless steel. Fit all 1G and 2G turbo DSM, and Galant VR-4. Complete with...
$24.00
These sturdy exhaust flanges are made of stainless steel, precision cut and nicely finished. Perfect for your custom exhaust project. Specify 2.5" x 5/16" thick, or 3" x 3/8" thick.
$20.00
This gasket goes between the turbine housing and the manifold. Fits any standard Mitsubishi or compatible (like our Monster turbine housing) 7cm housing, including 16G and 20G, and all RS-series...
$74.95
StopTech Sport (formerly Street Performance) Brake Pads are engineered to meet the demands of high performance driving while maintaining the refinement and comfort expected in everyday driving conditions. Para-aramid composites...
Free
This page is not actually a product. If you are at this page, you may have been looking for parts for your Subaru here on MachV.com. We have SO MANY...
$6.00
Designed to look like an authentic warning label, this decal gives tongue-in-cheek advice to your passengers. Stick it on the sun visor, dashboard, or in the glove compartment. (Note that...
$479.00
Swift springs are made with a proprietary high-strength steel that allows for a narrower spring coil, meaning more suspension travel before coil bind. Swift springs are also lighter than the...
$357.75 $477.00
Swift springs are made with a proprietary high-strength steel that allows for a narrower spring coil, meaning more suspension travel before coil bind. Swift springs are also lighter than the...
$5.00
T-Bolt Clamps are superior to standard worm-drive clamps in every way. They tighten with a nut-and-bolt arrangement, so they won't slip. They are many times stronger than normal hose clamps....
$45.00 $50.00
The Thermalnator intake manifold gaske reduces your air intake by an average of 25 degrees F. Lower intake temps translate to more horsepower! Fits all 1995-1999 turbo DSM (Eclipse/Talon) cars.
$45.00 $50.00
Aftermarket Intake manifold gasket that reduces your air intake by an average temperature of 25 degrees F. Colder intake temps translate to increased power! Fits all 2003-2007 Mitsubishi Lancer Evolution 8 and...
$212.00 $249.00
Late-model MINIs incorporate active tire pressure monitoring systems (TPMS) that have a sensor inside each tire. If you want to buy a second set of wheels, but don't want to...
$62.40 $65.00
One of the weak points of the 4G63 is engine cooling; the small frontal openings, combined with obstructed airflow from a front-mounted intercooler, can lead to difficulties keeping the engine...
$6.00
Designed to look like an authentic warning label, this decal gives tongue-in-cheek advice to your passengers. Stick it on the sun visor, dashboard, or in the glove compartment. (Note that...
$211.00 $249.00
This boost controller is just like the old mechanical controller in that it relies on mechanical, underhood adjustments to set boost. That also means that it is rock-solid reliable,...
Sold Out
This is a replacement hardware kit for the TurboXS turbo-back exhaust for Mitsubishi Lancer Evolution 8 and 9. Kit includes a donut gasket, flat gasket, nut and bolts, and spacers....
$799.00
Turbo XS now offers a full turboback exhaust for the Evo X which features full 3" stainless steel piping from the turbocharger to the muffler. The system exits with dual...
$76.00
This kit adapts any TurboXS standard BOV or CBV to the 90-94 turbo DSM. Includes flange, billet elbow, hose plug, and vacuum hose. Blow-off valve sold separately. Fits all 1990-1994...
$819.00 $1,099.00
Designed with a true power enthusiast goals in mind. TurboXS uses a stunning 19x11.5x3 core with the proper fin density to ensure the best heat dissipation throughout the bar and...
$619.00 $699.00
Designed with a true power enthusiast goals in mind. TurboXS uses a stunning 19x11.5x3 core with the proper fin density to ensure the best heat dissipation throughout the bar and...
$114.75
The TurboXS High Performance Boost Controller uses a precision ball-and-spring design for fine tuning, combined with a bleed valve for coarse adjustment. The result is the ability to accurately control...
$116.10 $129.00
This simple and inexpensive intake from TurboXS features a billet aluminum mass air sensor adapter. It eliminates the factory airbox, freeing up space for more under-hood go-fast parts! Kit includes...
$407.15 $479.00
The TurboXS Hard Pipe Kit offers improved airflow, quicker boost response, and higher boost pressure at redline compared to the restrictive and turbulent OEM corrugated rubber pipes. In addition to...
$629.10 $699.00
This colossal bolt-on replacement intecooler core is 3.5" x 11.75" x 24", dwarfing the puny stock intercooler. The bar and plate core design dramatically improves cooling efficiency over the stock...
$275.00
The TurboXS Racing Bypass Valve is fabricated from billet aluminum, with a solid brass piston. It's adjustable to handle boost from as low as 10psi all the way up to...
$275.00
The TurboXS Racing Bypass Valve is fabricated from billet aluminum, with a solid brass piston. It's adjustable to handle boost from as low as 10psi all the way up to...
$199.00
The factory Evo bypass valve works fine, but is made of fragile plastic (we can't even count the number of customers who tell us they broke the vacuum nipple off...
$275.00
The TurboXS RFL is made for one thing: NOISE! (RFL stands for "Real...Loud".) Precision machined from billet aluminum and brass, the RFL features a horn outlet that projects and amplifies...
$275.00
Some people get a blow-off valve because they have an speed-density air metering and no longer have the need to have a bypass valve return pipe. Others...just like the attention. For that...
$72.25
The TurboXS Standard Boost Controller is a solid, simple boost controller that works on just about any turbo car. Comes complete with installation instructions, hoses, adjustment wrench, and zip-ties.
$79.00
At last, there's another gauge mounting solution for your 52mm gauges in your 95-99 Eclipse or Talon. This bezel holds one standard gauge in each corner of the instrument cluster....
$5.00
It's a badge holder with a spring-loaded retracting reel. It holds your badge. It is unamused. In stock now!
$9.00 $12.00
These items aren't MINI parts, but they're things we thought you still might like.It's a mug. It's not amused. The "unamused" face conveys what we feel about a lot of...
$219.00
This genuine Mitsubishi upper gasket set includes all the seal, gaskets, and o-rings that are found on the head. Gasket kits are not returnable, so please call if you have...
$45.00
Vibrant silicone vacuum hose is designed to handle the extreme conditions found in high performance engines. These hoses will not collapse under high vacuum conditions and don't peel, crack or...
$125.00
This fuel pump supplies 255 liters per hour, compared with a rated 190 lph (actual flow is even lower) for the stock pump. The upgrade is enough pump for as...