Owner: Aaron Litt - MrMoo
Currently away from Mach V for educational purposes but will be returning this summer to bring some chaos to the new facility
Update 3/25/02: After a total failure of the stroker crank the car is back together and stronger then ever with a new 4g64 crank. Pump gas and 16psi has about the same butt-o-meter feel the 18psi dyno run above had. Can't wait to get it back to a dyno!
Engine mods:
Fully built Buschur Racing stage 3 stroker o-ringed block
4G64 knife edged crank
Crower Rods
9.5:1 forged pistons
Total Seal Rings
ARP hardware
BR Dampened Underdrive pulley
Mitsubishi 1.7mm Metal Headgasket
Mach V Rocket Omega Turbo (O-It's a Mega Big Turbo - 60-1 compressor for those interested)
Ported 2g exhaust manifold ceramic coated by Swain Technologies
Atmosphere O2 eliminator dump housing
3" Mandrel Downpipe
3" test pipe
Buschur Racing 3" race exhaust
Ported and multi angle valve jobbed head
Stiffer valve springs
HKS cams 264/272
Unorthodox Racing Adjustable Cam Gear on the exhaust cam
Extrude Honed Intake Manifold
Buschur Racing FMIC kit
Dejon Tools 3" Hard Intake Pipe
2g MAF
A'PEXi BOV
A'PEXi 2g air filter kit
A'PEXi S-AFC
A'PEXi AVC-D
ND 720cc injectors
MSD DIS-2 Ignition
Walbro 255liter fuel pump)
Fluidyne Radiator
Spal slim line fans
2 row turbo oil cooler
Information mods:
A'PEXi 30-0-30psi EL Boost gauge
A'PEXi EL EGT gauge
SPI air inlet temp gauge (2 probes before and after IC)
SPI fuel pressure gauge
Intelletronix A/F gauge
Custom gauge faces by the Purple Plymouth Guy
A'PEXi Turbo Timer (volt, o2, A/F features)
Oil pressure, water temp, oil temp gauge panel w/Autometer ProComp gauges
Amp temp gauge to monitor the MSD mounted in the glove box
Footwork/Drivetrain:
ACT 2600 clutch w/6 puck unsprung friction plate
Quaife Limited Slip Differential
Fidanza Lightweight Flywheel
13" rotor BAER track brake kit
KYB AGX shocks
Ground Control springs
Prothane motor mounts in all 4
Energy Suspension mounts all around
17" Antera 181 rims w/ 235/40 Nitto 450s
Metal Matrix pads for the rear!!! (ooooh yeah!)
CCW Custom made 16" rims with 26" slicks to clear Baer rotors for drag strip
Non Performance Related Mods:
Reappolstered headliner, sun visors, and door panels with cow motif
Corbeau Carrera Seats
Mach V Roll Cage
Schroth 3" Race Harnesses
Full stereo with amps and box (nice and heavy!)
Hella H4 headlight upgrade kit
Night Rider lights in the front grill (Don't ask....)
Aftermarket sunroof
Police/Avaition scanner (mounted below headunit)
CB radio
Loud Obnoxious alarm (so don't use this as a shopping list!)
Dyno run at top was before with an 18g turbo at 18psi on pump with hella knock counts... will be looking for some much larger numbers soon!
Will sell Kidney for parts....
Powered by 100% Liquid Bovine
Sign up to get the latest on sales, new releases and more …
© 2024 Mach V Motorsports. Speed and truth. Powered by Shopify