Need to replace the stock gasket between the exhaust manifold and the turbo? If you aren't going to a bigger turbo and just need to get going again this is what you need! This will work on 16g turbos but will cause a slightly restriction in the flow if you have a ported housing.
Tech Tip: The "6 cm" designation refers to an AREA measurement of a part of the turbine housing, NOT the diameter of the inlet. The "6 cm" gasket hole is not 6 cm across.
Fits all 1G turbo DSM with stock turbo.
Shipping Weight: 1.0 lb
Category: Engine gaskets
Use this gasket set to replace worn or leaky gaskets on your factory turbocharger. It can also be used during the install of your upgraded MHI TF06-18K turbo or stock...
These multi-layer steel head gaskets from Cometic are designed to take the abuse of high cylinder pressures along with the shearing load of the aluminum cylinder head expanding at a...
Finding a leak around the compressor section of your 14b/16g turbo? The stock O-ring hardens up over time, leading to air leaks. This OEM replacement will get your turbo airtight again....